COMX provides and stocks all the Raised Access Flooring understructure required for installation, add-ons, replacements and additional load support for new and older floor systems. We also inventory and provide consulting and recommendationsfor seismic zones - understructure & engineering certification for seismic zone construction.
Complete Pedestal Assembly with Base & Head
The piece that's attached to the sub-floor by a mastic or mechanical fastener. The base's height and pedestal head determine the finished floor height.
Inserts into the base and includes holes to fasten panels and stringers. There's usually a leveling to allow fine adjustments to the desired finish floor height.
Adjustable Swivel Head for Raised Access floor ramp installation.
Tate Access Floor Posilock Pedestal Assembly
Tate Access Floor Posilock Adjustable Head
A metal channel or square tube that's attached to the pedestal head that forms a grid and provides lateral stability. May either be snapped into place or fastened from the top with a screw. Stringer are available in2’and 4’ lengths allowing for standard (2' x 2'), (4' x 2') or (4' x 4') installations.
Screw Fasteners are used for installation of stringers and Raised Access floor corner bolt panels to pedestal heads. Sizes will vary depending on the Raised Access floor system.
Solvent Free Standard Pedestal Adhesive 1 Gallon
Rigid Grid System
Offering great lateral support, this system is generally used where panels are gravity held on the understructure.
Solutions for Seismic Zone Build Outs
COMX offers the most comprehensive variety ofpedestal typesand solutionsforlow to high seismic regions. Our full line of seismic pedestals can further be strengthened by bolting them to the concrete slab for the most solid access flooring systems available.